bluetooth and wireless technology

Rimax Wireless Speakers

The Rimax UHF wireless TV/Hi-Fi Speaker System incorporates the latest RF technology to provide you with the ultimate in personal listening freedom as well as fine detailed sound.

Listen to TV, VCR, Hi-Fi or CD at your own optimum volume level without trailing cables. Simply attach the Transmitter to your audio source and the sound is automatically sent to the speakers. The speakers can either operate with batteries or can be plugged into the mains power.

These speakers are great for using with a PC or Laptop. Just connect the transmitter into the headphone socket of your PC and you can listen to internet radio or CDs at your desk or around the home/office.

Volume level can be individually adjusted for your left and right speaker and the system also features the latest ergonomic styling to match your existing audio/visual equipment. The system provides full audio frequency response and low distortion.

Other uses: BBQs, in the Bath (using batteries), Gardening, DIY, in the Workshop.

Technical specifications
 

Transmission: 863MHs FM stereo & PLL circuit

Power: Transmitter - 9V Power Adapter Speakers - 12V Power Adapter (included) or 8 x AA 1.5V

Speaker dimensions: 192 x 94 x 99mm

Frequency: 80Hz - 12KHz

Output Power: 60 X 60 Watts PMPO (3W+3W RMS)

3 channels PLL Transmitter 863.4, 863.8 and 864.2MHz

Auto tune speaker receiver

Range: up to 50m

Individual Volume and Base (DBB) control on each speaker

Contents
 

2 x Wireless Speakers

3 Channel transmitter

Audio cable 3.5mm to 2-RCA

Audio Jack adapter 3.5mm to 6.3mm

2 Power Adapters 12V for the speakers (cable length 1.85m)

Power Adapter 9V for the transmitter

User guide

Frequently Asked Questions

Q. Can you run more than one set of speakers off one transmitter?
 

Yes you can. As long as the speakers are within range you can run multiple sets of speakers off the one transmitter.

Q. Is is possible to just buy the speakers without a transmitter?
 

Unfortunately not.

Q. I want to add the Wireless Speakers to my Hi-Fi but want to continue using my existing speakers as well. If I connect the Transmitter into the headphone socket of my Hi-Fi this stops the existing speakers from working. Is there a way to connect the Transmitter to the system but not through the headphone jack?
 

If your system has two RCA connectors (RED & WHITE), the cable between the Transmitter and the audio source can be reversed. The Transmitter can have the audio jack connected to it and the two RCA jacks can connect to the audio source.

Q. Can I connect the Wireless Speakers to my TV or Satellite receiver?

If your TV, Satellite receiver or other box has a headphone socket then, no problem. However if it doesn't it will quite likely have two RCA Audio OUT connectors (RED & WHITE RCA). In this case you can reverse the cable between the Transmitter of the Wireless Speakers and the audio source and it will work.

Can’t find the answer to your question? Click here to send us an email and we’ll get straight back to you.

Customer Care - support@topneed.co.uk or skpe:topneedltd

Topneed Ltd - 5 Croft Lane - Southerndown - Vale of Glamorgan - CF32 0RT
South Wales - United Kingdom (UK)